PORSCHE 997 AIR SYSTEM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This item is in stock and ready to ship!
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped space. Carbon f...(choose a part on the right to read more)
General Fitment 911 1998-05
$3,416.49
Make a selection
The problem with the original air box, is the "momentum" of air delivered to the engine, as well as ambient temperature around the air intake. The original system picks up a hot air from the 3" opening. Our system involuntarily receives its air without restrictions-360 degrees, right from under the side-open grill. Also note, the engine's power drops 1% for every 10 degree rise in temperature. On larger engines the drop is insignificant. On smaller engines the problem will weaken the engine at higher rpm levels. The performance difference demonstrated by our system is noticeable at higher rpm levels, when more air is required. Using the original “dove tail” screw, our system attaches easily to the same ...(choose a part on the right to read more)
General Fitment 914 1970-76
Discontinued
View/Change Diagram
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,244.08
Make a selection
Ksport procomp front big brake kit 14 in. Rotor 8 piston caliper Porsche Boxster 96+
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,693.25
Make a selection
Power slot rear right cryogenic slotted rotors Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As an...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
Power slot front right cryogenic slotted rotors Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As a...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,334.30
Make a selection
Schnell performance header set Porsche Boxster/s 00-04
Schnell_ - the absolute highest quality, performance increasing, sound enhancing exhaust systems available for your Porsche
One piece, cast collector junction for optimum performance. Much more percise and durable thatn anything available.
Formula 1 nascar and indy car style merge collector. Maxes your exhaust airflow. Only seen on systems twice as expensive.
100% mandrel bends for the absolute best possible airflow.
Features:
-polished t304 stainless steel (ss)
-14 gauge ss for superior strength
-expensive cast junction collector!
-stainless steel tig welds
-sold as a pair.
-direct bolt-on
-10-13 hp + to...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,089.44
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Schnell performance header set Porsche Boxster 2.5l 97-99
Schnell_ - the absolute highest quality, performance increasing, sound enhancing exhaust systems available for your Porsche
One piece, cast collector junction for optimum performance. Much more percise and durable thatn anything available.
Formula 1 nascar and indy car style merge collector. Maxes your exhaust airflow. Only seen on systems twice as expensive.
100% mandrel bends for the absolute best possible airflow.
Features:
-polished t304 stainless steel (ss)
-14 gauge ss for superior strength
-expensive cast junction collector!
-stainless steel tig welds
-sold as a pair.
-direct bolt-on
-10 hp + to...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,089.44
Make a selection
Power slot rear left slotted rotor Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As any weekend ra...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
On the 997.1 GT3 / rs, air gets diffused and creates lots of turbulence. This genuine motorsport cup ram air spoiler, reduces turbulence and channels more air into the intake above 65 mph. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2007-11
From $415.80
Make a selection
Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $859.10
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Brombacher 997.2 tt ?sport stock? Stainless steel, cat bypass for OEM muffler
Facts:
- + 21 crank hp & + 18 crank torque**
- reuses OEM muffler, perfect for those looking for more sound and power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- reduces backpressure and thermal stress
- 6 on a scale of 1-10 in volume (1 being stock).
- reuses OEM v band style connecting hardware.
- made in Germany.
- available in 100 cell or 200 cell. Please ask your sales person for pricing.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programmin is necessary.
- reuses OEM tips.
Fv...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$2,932.72
Make a selection
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear plates are also standard on each caliper design. The op...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,693.25
Make a selection
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear plates are also standard on each caliper design. The op...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,693.25
Make a selection
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pad surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications). Ksports extreme lightweight supercomp caliper comes in differential bore configuration and feature much larger pistons than the procomp calipers. Each one is machined from aircraft quality billet, weighs just over 7lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,104.00
Make a selection
* features a fully-threaded shock body (not an imatation sleeve-over)
* allows for aptimum weight transfer & an aggressive look
* improves corner-holding ability and handling-without a bone-jarring ride
When most people hear the word "coil-over", they immediately think "racing suspension", and consequently, "rough ride". H&r is the originator of the true coil-over system for the street and continues to lead the market with an extensive line of applications. Each shock is paired with a progressive-rate spring that is engineered from its inception to work with the shock's valving, creating a finely tuned suspension system. This is a special item and cannot be returned if packaging has been...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,485.00
Make a selection
Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche Boxster 96+
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,873.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|